NFSTRIKE T238 Digital Trigger Unit V3-1.9 Programmable MOSFET with Overheat Protection & Auto-loading

Features:

• T238 digital trigger unit is a programmable MOSFET which is specially designed for AIRSOFT and gel ball version Gearbox V3. With high speed processor and 2 high power MOSFET chips, this system has many functions, such as binary trigger, auto-loading function for gel ball magazine, over heat protection and so on. Besides, it also has the functions of gearbox block-up protection. It can effectively improve the stability, shooting speed and response speed of gearbox. The module uses a maximum of 11.1V batteries. Soldering and wiring are required.
• Functions: 1.Binary trigger. Put the selector in semi-auto position, pull and hold the trigger for 3 seconds will change the semi-auto function into binary trigger shooting mode; 2.Block-up protection. When gearbox Block-up occurs, the system stops working and emits an elongated ‘beep’ sound. Please check the wave box immediately by power off; 3.Auto-loading function is designed for gel ball blaster magazines with motor inside, when changing the magazine, the magazine motor will run automatically for 0.5 second; 4.This module is able to increase rate of fire, the stability of single-shot and make batteries have higher durability. The energy that support the active brake function comes from the inertia of motor, stop the piston without delay. The effect of active brake is significant.
• Warning: This upgrade kit is designed for professional AIRSOFT/gel ball blaster player who can fully disassemble and assemble.
• Automatic Electric Blaster. The compatibility with all Gearboxes is not guaranteed, but it can fit into standard or common brand Gearboxes V3 without larger modification. Related Tools and skills is needed for installing the product.
• Attention: 1.Protect the detection switch while installing, do not pull the trigger before finishing installation in case that the trigger breaks the detection switch; 2.Mind the positive and negative of the motor, do not reverse; 3.Gearbox, motor and grip is not functional before finishing installation. Please finish the installation at first; 4.Please use Spring smaller than M150; 5.Please keep your gearbox clean, and keep the LEDs D5, D6 clean.